Use Nylon Straps To Truck Camper Tie Downs – nylon belts are a common type of tie down used to fix the site inter others, while a vehicle is in progress. The nylon strap will be provided with two steel hooks and a ratchet or clamp system that allows tightening the belt significantly, while keeping the well fixed to the camper truck bed on which it was mounted. Nylon straps prevent campers from bouncing on the bed of the truck on the bumps and slip out of the back of the truck when accelerating.
Instructions use nylon straps to truck camper tie downs, hook the end of the non-ratcheting nylon strap to the front hook on the left or right side of the camper. Attach the ratchet hook to the side of the point of the truck bed hook attachment. Ratchet down the belt until it is slightly tight enough so that it will remain in position for the moment. Connect every corner of the camper to the truck bed in the same manner as described. In Phase 1, ratchet down.
Next steps use nylon straps to truck camper tie downs, tighten all the four bands with increments gradually narrower until the nylon straps are stiff for the voltage. Tying the free end of the nylon strap (the part fed through the ratchet) to the truck or the ratchet. The tie is not important; above all, take care to prevent the excess strap from whipping around in the wind or becoming tangled in the wheels of the truck.