Camper Jacks – First, go to the tongue side of the caravan, usually side with kitchen and bathroom. Assemble one set of brackets under the front of the camper part of the truck cab-over camper. Adjust the mount such jack face – where jack bolts bracket – facing and there is just enough distance jack fits under the caravan. Drilling bracket in position. Mounting another on the same side of the caravan so it is parallel to the first, but the back of the caravan as possible.
Second steps to use camper jacks, go to the opposite side of the camper and mount last bracket underneath side of the camper, again with mount facing and just enough room to plug that fits under the caravan. Third, park the caravan and set the emergency brake. Contacts the mounting brackets and push lock pins through the contacts mounting holes.
Last steps to use camper jacks, turn hand unscrew the connectors clockwise to raise the truck camper and make it level. Half turn adjustments and use truck camper internal level – often found on the outside near the front of the caravan – the truck camper is flat. Place wheel chocks under the camper deck and lock the connectors in an upright and level position.