Cab Over Camper – Commonly referred to as truck campers, campers cab over sit on the bed of a pickup truck with a bunk area, which extends forward on the roof of the truck. Because they are made in the back of a truck, the cab over camper can be taken in rough terrain areas that caravans and travel trailers cannot pass through. Security reasons, cab over campers are secured to the truck bed to main- slide and jump around the truck. Guide the tie-down bracket to the arm attachment points to the outer edge of the bed truck. Insert the mounting brackets to the corner of stake pockets in truck. Place bed rail filling rail protection under the supports with the fingers. Push the tie-downs firmly in holes, and tap the brackets down with a rubber hammer, if necessary.
Attach the mounting brackets to the rail truck. Press the fixing screws on the support through the access hole inside the game. No pockets tighten the screws completely. Secure the block. Slip clips staples in the back inside edge of rail bed. Aline the holes in the brackets with the holes in the bracket and tighten the screws with the fingers. Press support fixing bolts and screws fixing firmly with a torque wrench.
Load the camper to the truck bed, leaving a 1-inch space between the front wall and front camper truck bed rail. Attach the hooks on one end of the assembly line for mounting holes in the arm supports. League hooks at opposite ends of the chains to the factory installed mounting brackets in the corners camper. Tighten the turnbuckles in jail with your hands until all slack has been removed from the turnbuckles chains. Press a full back even with a key to protecting a cab over camper.