Pick up truck campers – pick up truck campers is combined both pick up and truck camper. Here, we will know how to hook the pick up campers and truck campers or called with pick up truck campers. First, unscrew the bolts on both sides of the pickup truck tail gate. Use a socket wrench to do it. Loosen the tailgate of the truck.
Lift camper with four jacks, one at each corner. The campers of pick up truck campers must be at least three inches higher than the truck’s bed. Third, remove tie-downs and solve the safe tape from the camper. Fourth, knack your pick up the camper slowly and carefully. Make sure the truck’s center is aligned with the caravan center. This may require a spotter to direct you. Once satisfied with the alignment, park the truck and apply the parking brake.
Lower the jacks to the camper rest entirely on the truck’s bed. Make sure the connectors are sunk in equal proportion. Lower the front sockets to the same level as the rear jacks. Sixth, run nylon straps through the mounting holes on the pick up and truck camper. Tighten them well. Using high test straps that are designed to tie down heavy objects. Seventh, lift the tail gate back in his position, it locks into place. Slide the caravan to test for any loose ribbons that can be problematic while driving. Eight, connect trailer lights to the truck. Having lights hooked up is important for your safety while on the road. Last, take a test to ensure that the pick up truck campers is fitted properly and securely.